Elitech RC-5 CSV Analyzer
Direct analysis for RC-5 temperature loggers
RC-5 Integration Benefits
🔌 Direct Import
Upload CSV files directly from Elitech RC-5 software without format conversion.
📊 Automatic Recognition
Detects RC-5 format, handles timestamps, and validates temperature ranges automatically.
⚡ Instant Results
Get compliance certificates in seconds with detailed cure analysis and verification.
RC-5 Setup for Powder Coating
🔧 Logger Configuration
- Set recording interval to 30 seconds or less
- Ensure battery level > 50% before use
- Calibrate temperature range for your oven
- Start logging before parts enter oven
📤 CSV Export Steps
- Connect RC-5 to PC via USB
- Open Elitech software
- Select data range → Export → CSV
- Upload CSV to ProofKit for validation
RC-5 Model Selection
⚠️ Important Note
Standard RC-5 models cannot measure powder coating cure temperatures (160-200°C). Use high-temperature loggers like Testo 175 T2, MadgeTech HiTemp140, or thermocouple-based systems for accurate cure monitoring.
Frequently Asked Questions
How do I export CSV from Elitech RC-5?
Connect your Elitech RC-5 to the PC software, select your data, and click Export → CSV. The exported file includes timestamps and temperature readings ready for validation.
What temperature range does RC-5 support?
The Elitech RC-5 measures -30°C to +60°C with ±0.5°C accuracy. For powder coating cure temperatures (160-200°C), use the high-temperature RC-5+ model or consider Testo/MadgeTech alternatives.
Does ProofKit work with RC-5 CSV format?
Yes, our system automatically recognizes Elitech RC-5 CSV format and handles timestamp conversion, temperature units, and data validation seamlessly.
Can I use RC-5 for monitoring cure temperature?
Standard RC-5 models max out at 60-85°C, which is insufficient for powder coating cure monitoring (160-200°C required). Use high-temperature loggers specifically designed for industrial ovens.